All Forums
 Microsoft Windows CE
 CE Downloads and Documents
 Bitsy Plus CE Build Revision History
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Author Topic  

akidder

1519 Posts

Posted - 04 Mar 2004 :  15:13:16  Show Profile  Email Poster
CE Build Revision History: Bitsy Plus


Legal Notice
These Windows CE images are intended to update Bitsy Plus product for which a Windows CE license has already been purchased. You must purchase a new license for every unit that is updated to a new version of Windows CE (e.g. 5 to 6) or updated to a different license model (e.g. Core to Pro).

By downloading any Windows CE image from this site, you agree to the following Microsoft statement:
"This software is subject to the terms and conditions of the end user license terms. This software is provided only for use with, and for licensed end users of, the Eurotech Bitsy Plus. Any other use of this software is strictly prohibited and may subject you to legal action."



The following summarizes the changes made between CE builds for the Bitsy Plus. Release dates are approximate.

Related topics: Bitsy Plus user manual, CE files, boot code

CE.NET 4.1

4.10.14 (21-Aug-2003)
- Adds Compact Framework RTM
- Adds DelCryptoKeys.exe and SDAuthUtilDevice.exe

4.10.13 (21-May-2003)
- Applied all QFEs to date
- Audio driver: initialization times out if fails during boot or wakeup
- Ethernet driver: synchronized with BitsyPlus CE 3.0 build 3.16
- EXT_IRQ3 handler corrected
- Serial driver: updated based on new Bitsy driver to work reliably with PCMCIA modems
- USB Client: reconnects after wakeup

4.10.12 (28-Feb-2003)
- Applied all QFEs to date
- Supports CompactFlash and Ethernet personality boards, in addition to custom boards
- Debug messages are disabled by setting in adsload.hwt
- Flash disk driver: Updates flash operational mode after writing

CE 3.0

3.23 (20-Feb-2004)
- Touch screen driver: If current calibration data is invalid, performs recalibration
- Touch screen driver: Process of saving calibration data is streamlined; \Temp\TchCal.ini is no longer used
- Restart functionality improved to reset under a wider variety of conditions
- IOCTL_HAL_REBOOT acts same as restart.exe

3.18 (11-Jul-2003)
- USB driver: Registry key will turn off USB power before sleep:
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Power]
"USBPowerOFFBeforeSleep"=dword:1

- Does not support EXT_IRQ3

3.17 (3-Jun-2003)
- Power manager: Sets GPIO14, GPIO16, GPIO17 & GPIO24 to Low during sleep
- Power manager: Puts SA-1111 to sleep instead of reset during system sleep
- Touch panel driver: updated same as Bitsy
- USB ActiveSync will reconnect after wakeup
- EXT_IRQ3 handler corrected

3.16 (13-May-2003)
- Ethernet driver: improved robustness and failure recovery under heavy network traffic conditions

3.15 (4-Apr-2003)
- AC97 audio driver: shorter boot time
- Serial driver: Incorporates update from Bitsy to resolve system lockups during PPP communications

3.14 (28-Feb-2003)
- Corrects occasional failure to wake from sleep when using rev A Ethernet Bitsy personality board
- Supports disabling debug output (adsload.hwt 0xC0000F40 entry)
- Touch panel driver: increased sensitivity

  Topic  
 Forum Locked
 Send Topic to a Friend
 Printer Friendly
Jump To:
Eurotech Support Forums © Eurotech Inc. Go To Top Of Page
This page was generated in 0.03 seconds. Snitz Forums 2000